We’ve been placing wall in our Revit model. So far, we use generic type. It only has one layer, so you might not notice that you can actually define exterior and interior wall. Activate modify tool. Select one of your wall. You should see arrow symbol to flip your wall. The arrows are supposed to […]

Let’s continue our tutorial. You have tried several wall types in the previous Revit tutorial. You might find out that even Revit has many types of walls, you need to define your own types. This is what we are going to do now, creating our own wall types! Type vs Instance Properties First thing first. […]

In this Revit tutorial, we will add more building components. We will create floors in our Revit model.

Let’s go further with our Revit tutorial. In the last tutorial, we learn about creating floor. Now we are going to create roofs. There are 3 ways to make this building component. By footprints, extrusion, and by face. In this tutorial, we will discuss about creating it by footprints. In your Revit project, open your […]

In the previous tutorial, we learn about creating roof in Revit model. We created a sloped roof, and a roof slab below it. We are going to use the roof slab as a gutter. So in this tutorial, we will close it edges using roof fascia. We will learn how to create two profile family, […]

We completed our Revit model exterior by creating roof. Now we start working on the interior by creating staircase. If you always create stairs by drafting it in AutoCAD, you will love stair tool in Revit! Revit create stairs automatically, it will also calculate how many risers you should create to the next level. It’s […]

Illustration: stock.xchng We have created staircase in our Revit model. But it’s not finished yet. There are some open area we have to close by adding railings. On the balcony at the front and back of the building, and on the void next to our stair. We will finish this in this session. As this […]

In this Revit Architecture tutorial, we continue to finish our model by adding ceilings.